Moisture-proof science: One minute to understand why the basement will be "warm in winter and cool in summer"?

You've all heard the phrase "warm in winter and cool in summer." 

Friends who often access the underground parking lot should be able to feel a phenomenon, that is, the room temperature of the underground parking lot always gives people the feeling of "warm in winter and cool in summer", and the temperature difference will be quite obvious when walking into the underground from the outside. The relative air humidity and temperature difference in the basement can lead to humidity and mildew if there is no preparation plan for prevention in advance. There are the following specific manifestations:

1, the basement is usually very dry, only in the rainy season or summer humidity will increase significantly, the wall hung with water beads, which shows that humidity is caused by indoor air condensation, this phenomenon is also called condensation.

Condensation is very common in daily life, and water mist on lenses when entering a warm room in winter; The water beads on the cold drink cup in summer are all hot air condensed into water.

In simple terms, when the high temperature and high humidity air meets the low temperature and low humidity basement, the temperature difference is generated, resulting in dew, especially in the rainy season, which is very obvious. At the same time, plates, coatings, etc., are easy to mold after being damp.

2. The basement is in contact with the soil all the year round, and the ventilation is not timely.

There are many owners in the decoration, or when the developer delivery has dug the basement lighting well, think that in the basement dig a yard or lighting well, you can be ventilated, in fact, in real life, the air in the basement is not circulating up.

In fact, many basements are neither leaky nor waterproof, but still dew and mold, which is a congenital defect of the basement.

Some owners will choose a product or machine to solve this problem, but two or three years later or in the "plum rainy season", "back to the south day" arrival, the basement began to dew and mold.

How to solve the problem of basement "warm in winter and cool in summer"

How to solve the problem of the basement, in fact, the solution is not difficult, but it takes energy. We can solve the problem of condensation from the above reasons, improve the water resistance of materials and articles, mold resistance, reduce the air humidity of these three aspects of each other to solve.

First: to solve the problem of condensation, you can start from two aspects.

1. Do insulation in the basement: increase the wall temperature, do a good job of the wall floor insulation layer, to prevent the wall and the surrounding soil temperature as low. Solve the temperature difference between the air and the wall and the ground, or solve the problem of "warm in winter and cool in summer" in the basement.

2. Moisture absorption: Reduce the change rate of air humidity, which can avoid condensation.

In order to function and aesthetics, we will apply the decoration materials that are easy to be damp and moldy to the basement, which mainly include gypsum board, wood, putty, paint, leather goods and so on. These articles need to be treated against moisture and mildew.

For example, the gypsum board and wood can be closed and mildew suppressed, so that the gypsum board and wood can be isolated from the humid air and water, so that it is not damp and mildew in a humid environment.

Through air conditioning, fresh air, dehumidification and other equipment, strengthen the air flow to control the humidity of the basement. These traditional equipment is only to make the air circulation of the basement, so that the ventilation and temperature are controlled, but an auxiliary role, we must not put all the hope of the basement moisture is placed on these traditional equipment.

Fourth: It is also the most protective method, the key to ensure that the basement is dry, the use of electroosmotic pulse technology

With the electroosmotic pulse technology, the water molecules, the moisture in the wall, are always electrically ionized and expelled to the outside. Our electroosmotic pulse technology monitors the wall 24 hours a day and automatically operates when changes in wall humidity are detected.

Compared with the solid wood customized by the villa owner, the home theater and gym made underground can maintain a dry and comfortable environment for a long time, which has a very obvious effect. The investment is very worthwhile.

These four aspects can be done with each other, so that the basement not only can not see dew and mold on the wall and ground, but also can not smell the smell of mold, but also can make the environment of the basement comfortable, want to ventilate, free from the influence of outdoor air, whether it is raining or high temperature outside.

Tongqiang Technology has been committed to solving the problem of moisture resistance in underground space, and participates in the whole process of space moisture resistance solutions.

We focus on accurate long-term design:

No longer the pursuit of the "big" venue of cool extravagance, people-oriented re-start, more attentively in order to make you more relaxed.

Build a self-drying system for the main structure of the house to create a more comfortable and livable indoor and underground space.

There is no doubt that a technology has been invented is great, but it is still too weak to compete for this point of enthusiasm.

Relying on the fear of noise gradually, pushed to the thorn land, is the controversy is not big enough.

When the spotlight is focused, it begins to increase the chance of "being accepted".

-the end-

* We'd like to borrow a lamp from you *

The iteration of technology is the wisdom of scientists,

But for the story line to be more coherent, it needs a public awareness awakening.