Basement as a leisure and entertainment space, can be used as a video room, fitness room, wine cellar, storage room, storage room...... In order to stay comfortable in the basement, the first thing to solve is the problem of moisture and dehumidification.

Many people have a misconception: "waterproof is moisture-proof", that as long as the waterproof is done, the water will not enter the basement, the basement will not be wet. After checking in, it was found that the basement was still very damp, even if the dehumidifier was opened 24 hours, the corner floor furniture was damp and moldy or very serious.

The problem of humidity and mold in the basement of villas has become a headache for many homeowners

First of all, we should know why the basement is wet, and there are two reasons why it is wet:

1. Pores in the concrete structure

In the pouring process of building structure concrete, the mixed water used often exceeds the water consumption required by its own "hydration curing reaction", and the chemical reaction of this part of excess mixed water in the concrete curing process, the excess water becomes free water swimming in the body, and finally penetrates the outer layer of concrete, which is the formation process of capillary holes in the concrete structure.

2.Air temperature and humidity cause:

Through investigation, it is found that the normal temperature of the basement wall in the southern region is about 10-12 degrees Celsius, and the normal temperature of the basement wall in the northern region is about 15-17 degrees Celsius. Because the structural wall is affected by the moisture infiltration of water molecules and the temperature of the soil layer, the wall forms a cold wall. Once the outdoor air enters the underground, due to the difference of heat and cold, the wall becomes cold. The air temperature and the wall temperature formed a serious temperature imbalance, resulting in condensation and condensation on the wall.

Why is waterproof not equal to moisture-proof?

Misunderstanding:  waterproof ≠ moisture

In the process of renovation, many owners either ignore the problem of damp and mildew in the basement; Or attach great importance to the selection of the best waterproof products on the market to do several waterproofing. Waterproof means to prevent water from penetrating into the floor or walls of the room, waterproof is to prevent liquid water.

Myth: Basements are always ventilated

When outdoor air enters the basement, it forms the intersection of cold and hot air with the basement, forming a cold condensation phenomenon in the position of the retaining wall, commonly known as the cold bridge phenomenon, and the cold bridge is the channel for cold and hot temperature transmission.

Three conditions for mold growth: humidity above 70%, air temperature 25℃, adequate nutrients.

Through the above analysis, to solve the problem of moisture in the basement, we must not use waterproof methods to deal with moisture. Otherwise, over time, under the action of underground moisture, the coating layer will bubble, fall off, return to moisture, and mold. Not only can not play the role of moisture, waterproof function will also be lost.

Therefore, waterproof is not equal to moisture-proof, any waterproof materials and technology on the market can prevent bright water, but never prevent moisture infiltration. If the moisture does not penetrate the basement, the same strong electroosmotic pulse impermeable dehumidification system is a good choice!

If your house is still being renovated, then use the electroosmotic pulse technology to remove the moisture from the building structure + the double-layer operation of the dehumidifier to make your underground space break the cocoon and regenerate; If you have already decorated, then only add a mobile dehumidifier, 24 hours a day!

Basement moisture and mildew protection solutions:

Passive moisture-proof is fundamental; Active moisture-proof is the guarantee.

 active moisture-proof depends on the equipment for dehumidification, in the case of power failure or equipment failure, the passive can still make the hard part not return to damp and moldy condition.

We focus on accurate long-term design:

No longer the pursuit of the "big" venue of cool extravagance, people-oriented re-start, more attentively in order to make you more relaxed.

Build a self-drying system for the main structure of the house to create a more comfortable and livable indoor and underground space.

There is no doubt that a technology has been invented is great, but it is still too weak to compete for this point of enthusiasm.

Relying on the fear of noise gradually, pushed to the thorn land, is the controversy is not big enough.

When the spotlight is focused, it begins to increase the chance of "being accepted".

-the end-

* We'd like to borrow a lamp from you *

The iteration of technology is the wisdom of scientists,

But for the story line to be more coherent, it needs a public awareness awakening.