How is dew formed?

Condensation refers to the appearance of condensed water on the surface of an object when the surface temperature is lower than the dew point temperature of the nearby air. The main performance is the appearance of uniform granular water droplets on the ground surface.

The reason for the dew phenomenon in the basement of the villa?

First of all, the temperature is lower. The temperature of basement walls and ground is relatively low due to contact with backfill soil, generally about 18 ℃.

Secondly, the humidity is higher. The temperature of underground indoor air is greatly affected by the environment. In the plum rain season from May to September, the temperature can reach 35℃ and the humidity can reach about 90%.

The impact of dewy basement.

Condensation leads to water marks on the wall and floor tiles, and the ground is prone to wet and stagnant water after the occurrence of water marks.

Dew lead to wall, ceiling particles appear water droplets, easy to mildew.

Can the phenomenon of basement condensation be solved?

Install TQ - EPT electroosmosis pulse permeability dehumidification system, electroosmosis pulse permeability dehumidifying technology, it is based on the electroosmosis principle of water, use the low voltage dc positive and negative charge, the low pressure under the action of electromagnetic field, through the () on the surface of the buried in the medial wall the positive positive row to negative direction (the cathode will be buried in the bottom of the wall of the lateral backfill soil). Thus, the water molecules in the pores or gaps in the wall are discharged to the outside of the wall (i.e. the negative direction), and prevent the water from the outside of the wall from infiltrating the inside. As long as the system is in working condition, the wall will always maintain the optimal moisture content, while effectively reducing the humidity of the air in the basement, and protecting indoor items from moisture erosion.

The main advantages of electroosmotic pulse anti-seepage dehumidification technology

1. Permanently solve the problem of water seepage and moisture in the structure, so that the concrete can maintain the best dry and wet state for a long time.

2. The system can prevent the steel corrosion or rust in the structure, and reduce the risk of concrete cracking caused by this, prevent the weathering and aging of concrete structure, prolong the service life.

3. The system is flexible and convenient to install, which can be directly installed on the wall inside the basement and corridor, without additional processing.

4. Can resist the infiltration of high-pressure water.

5. The system adopts conventional 220V AC and outputs ultra-low voltage pulse DC. The operation cost is the lowest, such as 300-1500 square meters of waterproof area, power consumption is about 0.3-1.5 degrees/day.

6. The system is safe and reliable, and the human body can touch without any danger of electrical injury.

7. The system does not have any destructive side effects on the concrete structure and does not affect the material composition of the structure.

8. After the system runs, there is no need for any late maintenance costs.

9. The operating life of the control device is about 20-30 years, and the comprehensive cost of the system is low.

10. With more than 30 years of successful experience in engineering use, "once invested, lifetime benefit" service.

Establish a self-drying system for the main structure of the house to create a more comfortable and livable indoor and underground space.

There is no doubt about the greatness of a technology being invented, but it is a thin line of enthusiasm.

Relying on the fear of noise, pushed to the thorns, is not loud enough.

When the spotlight is on, acceptance begins to increase the odds.