★Is the house no longer leaking after EPT is installed?

Yes, but the building structure should not have cracks greater than 0.2mm.

Although the presence of clear water in the structure does not affect the dehumidification effect of the TQ-EPT system on the structure, there may be cracks with clear water flowing, but the structure is dry.

Cracks greater than 0.2mm will form clear water, so in order to achieve the best results, cracks in the structure must be repaired first, and then install the system.

    ★Is your home damp free after installing TQ-EPT?

Moisture mainly comes from the structure of the house and the air. When a TQ-EPT system is installed, the humidity of the building structure is significantly reduced.

At this time, if the indoor air humidity can be controlled, the whole house will remain dry;

If doors and Windows are frequently opened, use air conditioners and dehumidifiers to reduce the air humidity and achieve the drying effect. (TQ-EPT system installed in the building structure is dry, using other dehumidification equipment can save 40-50% energy)

   ★Is it necessary to install a dehumidifier after installing this system?

Air conditioning and dehumidifier can only solve the humidity of indoor air (30%), but cannot solve the humidity of the structure (70%).

As long as the moisture in the structure is not removed, the effect of air conditioning and dehumidifier is only instantaneous. As soon as the air conditioner stops, the smell of the room will be generated immediately, and its operation cost is very high, and it consumes electricity. Therefore, the cost performance of dehumidification by air conditioning dehumidifier alone is very low.

The installation of TQ-EPT system can solve the dehumidification problem of the structure (solve 70% of the moisture problem in the environment), and then use air conditioning, dehumidification can save 50% of the energy consumption, and can ensure the drying effect.