Could you tell me how to protect the basement from moisture? Teach you the following a few good methods oh ~

Basement is often warm in winter and cool in summer. It is very comfortable to hide in it to avoid the cold. However, it has some disadvantages, such as basement is relatively easy to damp. Tools/Materials Desiccant dehumidifier Steps/methods

1, the simplest way is to hang some strong adsorption dryer in the basement, one of the most common is the activated charcoal bag, can also in some more easily wet corner and sprinkle some desiccant on the ground, can put the camphor ball breaking and activated carbon powder sprinkled with moisture there, but must be replaced every once in a while a desiccant.

2, because the main reason for humidity or ventilation problems, so you can add ventilation equipment in the basement, conditional can be added to open a few skylights for ventilation.

3. Check the basement wall or ground for cracks or damp points. If there are cracks and aging places prone to damp, the aging walls prone to mildew and damp can be removed.

4, do not put any plants in the basement, and you can put a dehumidifier in it. The effect of the dehumidifier is also obvious if the basement is not too big.

5. It is recommended to use some basement materials with good moisture-proof performance, such as laying a layer of tiles with good moisture-proof performance. Can try according to above method oh, the effect is very good.

Tq-ept electroosmosis pulse technology is mainly based on water electroosmosis principle and pulse technology.

The principle of water electroosmosis: in the structure of porous media (such as brick, wood, soil, concrete, etc.) on both sides of the installation of positive and negative poles, connected to the power supply, water molecules in the pores of the structure of hydration cation, hydration cation with positive charge under the action of the electric field from the positive to the negative direction of penetration, movement. Based on this principle, anodes are installed on the dry side of the structure (usually indoors) and cathodes are placed in the soil on the outside of the structure. When the electricity is energized, the water in the structure will penetrate and move from the inside to the outside of the structure, keeping the structure dry.

Pulse techniques is the technology of pulse signal generation and waveform transformation.

The combination of electroosmotic pulse technology and electroosmotic pulse technology can realize directional movement of water molecules in the pores of the structure, and then achieve moderate drying of the structure without excessive water loss and cracking.

Summary: There is knowledge about basement moisture-proof dehumidification to share here, pay attention to us in detail, let you know more relevant knowledge information oh!